Whatsapp：
86 16690818038
Xuchang Xsaiwei Machinery Manufacturing Co., Ltd. was established in 2020 and is located in Changge City, Henan Province, China.
The factory specializes in producing electric tricycles, other electric driven handling machinery, and small construction machinery.
Widely used in the handling of building materials, transportation of materials in farms and farms, and handling of materials in factories or warehouses.
It has the advantages of no pollution, simple operation, high load capacity, strong adaptability, high efficiency, and low maintenance cost.
2025-11
This electric trolley has a bucket that is 110 centimeters long, 70 centimeters wide and 50 centimeters high. The total length of the vehicle is 196 centimetersIt is 71 centimeters wide and 123 centimeters high. Thickened steel plate carriage, 4*6 square steel frame. Assemble a 60-volt 20-ampere Tianneng batteryA speed of 10 kilometers per hour. It can last for 8 to 10 hours on a full charge, which is sufficient for a day's workload. You can ride it while sitting, standing or pushing it with your hands.
2025-11
Standing electric flatbed truckThe cargo box of this electric flatbed truck is 120 centimeters in length and 70 centimeters in width. The vehicle is 145 centimeters in length, 70 centimeters in width and 120 centimeters in height. It is equipped with a 48-volt 20-ampere Tianneng battery and a 1000W pure copper brushless motor.The speed is 8 to 15 kilometers per hour. When fully charged, it can last for 8 to 10 hours, which is sufficient to meet a day's workload.The front wheels are equipped with 250-75 s
2025-11
This electric trolley has a cargo bed that is 95 centimeters long, 68 centimeters wide and 45 centimeters high. The entire vehicle is 115 centimeters long.It is 68 centimeters wide and 95 centimeters high. Thickened steel plate carriage, 4*6 square steel frame. Assemble the Tianneng battery at 48 volts and 20 amperes.A speed of 10 kilometers per hour. It can last for 8 to 10 hours on a full charge, which is sufficient for a day's workload. The tipping Angle is 90 degrees.It can easily unload sand and oth
2025-11
Based on your requirements, I have sorted out the information of the mainstream electric engineering tricycles in the current market for you. They are mainly divided into two categories: wide-body mining vehicles and conventional engineering tricycles . They each have their own focuses in terms of load capacity, power and applicable scenarios.A 15-ton four-wheel drive electric three-wheeled engineering vehicle and ore handling vehicle for the mine corridorWide-body mining engineering vehicl
2025-09
This electric trolley has a bed length of 95 cm, a width of 68 cm, and a height of 45 cm. The entire vehicle is 115 cm long, 68 cm wide, and 95 cm high. It features a thickened steel bed and a 4x6 square steel frame. It's equipped with a 48V 20A Tianneng battery and has a speed of 10 km/h. A full charge provides 8-10 hours of battery life, sufficient for a full day's work. The 90-degree dump bed allows for easy unloading of sand and other items. The tires are solid and puncture-resistant, with 250-75mm
2025-09
This electric flatbed truck has a cargo box measuring 120 cm long and 70 cm wide. The entire vehicle is 145 cm long, 70 cm wide, and 120 cm high. It is equipped with a 48V, 20Ah Tianneng battery and a 1000W pure copper brushless motor.It has a speed of 8-15 km/h. On a full charge, it can last 8 to 10 hours, which is enough for a full day's work.
2025-08
This electric trolley has a cargo compartment that is 98 cm long, 68 cm wide, and 50 cm high. The entire vehicle is 120 cm long, 68 cm wide, and 100 cm high. It features a thick steel plate cargo compartment and a 4*6 square steel frame. It is equipped with a TianNeng battery of 48 volts and 20 amps, with a top speed of 10 kilometers per hour. When fully charged, it can last for 8-10 hours, sufficient for a day's work. The dumping angle is 90 degrees, allowing for easy removal of sand and other materials. The tires are solid tires, providing protection against punctures and explosions. The front wheels use 250-75 universal wheels, and the rear wheels use 300-8 load-bearing wheels. The rated load capacity is 500 kilograms, enabling it to easily climb slopes less than 30 degrees. If you also want to own such an electric engineering vehicle, you can contact xsaiwei@hotmail.com or wjcgxg@gmail.com.
2025-08
This electric handcart has a cargo compartment that is 95 cm long, 68 cm wide and 45 cm high. The entire vehicle is 115 cm long, 68 cm wide and 95 cm high. It has a thick steel body, a 4*6 square steel frame. It is equipped with a TianNeng battery of 48 volts and 20 amps, with a top speed of 10 kilometers per hour. When fully charged, it can run for 8-10 hours, sufficient for a day's work. The dumping angle is 90 degrees, allowing for easy removal of sand and other materials. The tires are solid tires, providing protection against punctures and explosions. The front wheels use 250-75 universal wheels, and the rear wheels use 300-8 load-bearing wheels. The rated load capacity is 500 kilograms, enabling it to easily climb slopes less than 30 degrees. If you also want to own such an electric engineering vehicle, you can contact xsaiwei@hotmail.com or wjcgxg@gmail.com.
2025-08
The cargo box of this electric flatbed vehicle measures 134 cm in length and 70 cm in width. The entire vehicle is 145 cm in length, 76 cm in width, and 115 cm in height. It is equipped with a TianNeng battery of 48 volts and 20 amps and a pure copper brushless motor of 1500W.The speed is 8-15 kilometers per hour. When fully charged, it can operate for 8 to 10 hours, which is sufficient to meet the workload for a day.Its rated load capacity is 1000 kilograms, designed for transporting wooden boards in environments such as construction sites and renovations.It can easily climb slope sections with an inclination of less than 30 degrees. If you also want to own such an electric engineering flatbed vehicle,you can contact xsaiwei@hotmail.com / wjcgxg@gmail.com
2025-08
Hand-pushed electric pallet truckThe cargo box of this electric pallet truck measures 105 cm in length and 68 cm in width. The entire vehicle is 120 cm in length, 68 cm in width, and 95 cm in height. It is equipped with a TianNeng battery of 48 volts and 20 amps and a pure copper brushless motor of 1000W.The speed is 8-15 kilometers per hour. When fully charged, it can operate for 8 to 10 hours, which is sufficient to meet the workload for a day.The front wheels are equipped with 250-75 solid tires, and the rear wheels are equipped with 300-8 solid tires. Its rated load capacity is 1000 kilograms.It can easily climb slope sections with an inclination angle of less than 30 degrees. If you also want to own such an electric engineering pallet truck,you can contact xsaiwei@hotmail.com / wjcgxg@gmail.com
